AWWA Standards — The Complete Printed Set

Money-Saving Set

Full print set contains all current AWWA standards. A one-year subscription for all new and revised standards is included with purchase. See below for a complete listing of included individual standards. Complete sets are not available for purchase by resellers; resellers must purchase products individually. Standards are also available individually in both print and downloadable PDF formats.

Includes

AWWA A100-20 Water Wells
AWWA B100-16 Granular Filter Material
AWWA B101-16 Precoat Filter Media
AWWA B102-15(R20) Manganese Greensand for Filters
AWWA B110-09 Membrane Systems
AWWA B112-19 Microfiltration and Ultrafiltration Membrane Systems
AWWA B114-16 Reverse Osmosis and Nanofiltration Systems for Water Treatment
AWWA B116-19 Electrodialysis and Ion-Exchange Membrane Systems
AWWA B130-18 Membrane Bioreactor Systems
AWWA B200-22 Sodium Chloride
AWWA B201-18 Soda Ash
AWWA B202-19 Quicklime and Hydrated Lime
AWWA B300-18 Hypochlorites
AWWA B301-18 Liquid Chlorine
AWWA B302-16 Ammonium Sulfate
AWWA B303-18 Sodium Chlorite
AWWA B304-21 Liquid Oxygen for Ozone Generation for Water, Wastewater, and Reclaimed Water Systems
AWWA B305-15 Anhydrous Ammonia
AWWA B306-15 Aqua Ammonia (Liquid Ammonium Hydroxide)
AWWA B402-18 Ferrous Sulfate
AWWA B403-16 Aluminum Sulfate — Liquid, Ground, or Lump
AWWA B404-14 Liquid Sodium Silicate
AWWA B405-16 Sodium Aluminate
AWWA B406-20 Ferric Sulfate
AWWA B407-18 Liquid Ferric Chloride
AWWA B408-18 Liquid Polyaluminum Chloride
B451-16: AWWA Standard for Poly (Diallyldimethylammonium Chloride)
AWWA B452-20 EPI-DMA Polyamines
AWWA B453-19 Polyacrylamide
AWWA B501-19 Sodium Hydroxide (Caustic Soda)
AWWA B502-17 Sodium Polyphosphate, Glassy (Sodium Hexametaphosphate)
AWWA B503-17 Sodium Tripolyphosphate
AWWA B504-18 Monosodium Phosphate, Anhydrous and Liquid
AWWA B505-18 Disodium Phosphate, Anhydrous
AWWA B506-18 Zinc Orthophosphate
AWWA B507-16 Phosphoric Acid
AWWA B510-18 Carbon Dioxide
AWWA B511-17 Potassium Hydroxide
AWWA B512-15 Sulfur Dioxide
AWWA B550-17 Calcium Chloride
AWWA B600-16 Powdered Activated Carbon
AWWA B601-17 Sodium Metabisulfite
AWWA B602-17 Copper Sulfate
AWWA B603-16 Permanganates
AWWA B604-18 Granular Activated Carbon
AWWA B605-18 Reactivation of Granular Activated Carbon
AWWA B701-18 Sodium Fluoride
AWWA B702-18 Sodium Fluorosilicate
AWWA B703-19 Fluorosilicic Acid
AWWA C104/A21.4-16 Cement-Mortar Lining for Ductile Iron Pipe and Fittings
AWWA C105/A21.5-18 Polyethylene Encasement for Ductile-Iron Pipe Systems
AWWA C110-21 Ductile-Iron and Gray-Iron Fittings
AWWA C111/A21.11-17 Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
AWWA C115-20 Flanged Ductile-Iron Pipe With Ductile-Iron or Gray-Iron Threaded Flanges
AWWA C116/A21.16-15 Protective Fusion-Bonded Coatings for the Interior and Exterior Surfaces of Ductile-Iron and Gray-Iron Fittings
AWWA C150-21 Thickness Design of Ductile-Iron Pipe
AWWA C151/A21.51-17 Ductile-Iron Pipe, Centrifugally Cast
AWWA C153-19 Ductile-Iron Compact Fittings
AWWA C200-17 Steel Water Pipe, 6 In. (150 mm) and Larger
AWWA C203-20 Coal-Tar Protective Coatings and Linings for Steel Water Pipes
AWWA C205-18 Cement–Mortar Protective Lining and Coating for Steel Water Pipe 4 In. (100 mm) and Larger—Shop Applied
AWWA C206-17 Field Welding of Steel Water Pipe
AWWA C207-18 Steel Pipe Flanges for Waterworks Service—Sizes 4 In. Through 144 In. (100 mm Through 3,600 mm)
AWWA C208-17 Dimensions for Fabricated Steel Water Pipe Fittings
AWWA C209-19 Tape Coatings for Steel Water Pipe and Fittings
AWWA C210-15 Liquid-Epoxy Coatings and Linings for Steel Water Pipe and Fittings
AWWA C213-22 Fusion-Bonded Epoxy Coatings and Linings for Steel Water Pipe and Fittings
AWWA C214-20 Machine-Applied Polyolefin Tape Coatings for Steel Water Pipe
AWWA C215-16 Extruded Polyolefin Coatings for Steel Pipe
AWWA C216-15 Heat-Shrinkable Cross-Linked Polyolefin Coatings for Steel Water Pipe and Fittings
AWWA C217-16 Microcrystalline Wax and Petrolatum Tape Coating Systems for Steel Water Pipe and Fittings
AWWA C218-16 Liquid Coatings for Aboveground Steel Water Pipe and Fittings
AWWA C219-17 Bolted Sleeve-Type Couplings for Plain-End Pipe
AWWA C220-17 Stainless-Steel Pipe, 1/2 In. (13 mm) and Larger
AWWA C221-18 Fabricated Steel Mechanical Slip-Type Expansion Joints
AWWA C222-18 Polyurethane Coatings and Linings for Steel Water Pipe and Fittings
AWWA C223-19 Fabricated-Steel and Stainless-Steel Tapping Sleeves
AWWA C224-17 Nylon-11-Based Polyamide Coatings and Linings for Steel Water Pipe and Fittings
AWWA C225-20 Fused Polyolefin Coatings for Steel Water Pipe
AWWA C226-19 Stainless-Steel Fittings for Waterworks Service, Sizes 1/2 In. Through 72 In. (13 mm Through 1,800 mm)
AWWA C227-17 Bolted, Split-Sleeve Couplings
AWWA C228-19 Stainless-Steel Pipe Flange Joints for Water Service—Sizes 2 In. Through 72 In. (50 mm Through 1,800 mm)
AWWA C229-20 Fusion-Bonded Polyethylene Coatings for Steel Water Pipe and Fittings
AWWA C230-22 Stainless-Steel, Full-Encirclement Repair and Service Connection Clamps for 2 In. Through 12 In. (50 mm Through 300 mm) Pipe
AWWA C231-17 Field Welding of Stainless-Steel Water Pipe
AWWA C300-22 Reinforced Concrete Pressure Pipe, Steel-Cylinder Type
AWWA C301-14(R19) Prestressed Concrete Pressure Pipe, Steel-Cylinder Type
AWWA C302-22 Reinforced Concrete Pressure Pipe, Noncylinder Type
AWWA C303-17 Concrete Pressure Pipe, Bar-Wrapped, Steel-Cylinder Type
AWWA C304-14(R19) Design of Prestressed Concrete Cylinder Pipe
AWWA C305-18 CFRP Renewal and Strengthening of Prestressed Concrete Cylinder Pipe (PCCP)
AWWA C500-19 Metal-Seated Gate Valves for Water Supply Service
AWWA C502-18 Dry-Barrel Fire Hydrants
AWWA C503-21 Wet-Barrel Fire Hydrants
AWWA C504-15 Rubber-Seated Butterfly Valves
AWWA C507-18 Ball Valves, 6 In. Through 60 In. (150 mm Through 1,500 mm)
AWWA C508-17 Swing-Check Valves for Waterworks Service, 2 In. Through 48 In. (50 mm Through 1,200 mm) NPS
AWWA C509-15 Resilient-Seated Gate Valves for Water Supply Service
AWWA C510-17(R21) Double Check Valve Backflow Prevention Assembly
AWWA C511-17(R21) Reduced-Pressure Principle Backflow Prevention Assembly
AWWA C512-15 Air Release, Air/Vacuum, and Combination Air Valves for Water and Wastewater Service
AWWA C514-20 Air Valve and Vent Inflow Preventer Assemblies for Potable Water Distribution System and Storage Facilities
AWWA C515-20 Reduced-Wall, Resilient-Seated Gate Valves for Water Supply Service
AWWA C516-21 Large-Diameter Rubber-Seated Butterfly Valves, Sizes 78 In. (2,000 mm) and Larger
AWWA C517-16(R21) Resilient-Seated Cast-Iron Eccentric Plug Valves
AWWA C518-18 Double-Disc, Swing-Check Valves for Waterworks Service 2 In. Through 48 In. (50 mm Through 1,200 mm) NPS
AWWA C519-18 High-Performance Waterworks Butterfly Valves—3 In. (75 mm) Through 60 In. (1,500 mm)
AWWA C520-19 Knife Gate Valves, Sizes 2 In. (50 mm) Through 96 In. (2,400 mm)
AWWA C521-18 Plastic Ball Valves
AWWA C530-17 Pilot-Operated Control Valves
AWWA C541-16(R21) Hydraulic and Pneumatic Cylinder and Vane-Type Actuators for Valves and Slide Gates (PDF)
AWWA C542-16(R21) Electric Motor Actuators for Valves and Slide Gates
AWWA C550-17 Protective Interior Coatings for Valves and Hydrants
AWWA C560-21 Cast-Iron Slide Gates
AWWA C561-21 Fabricated Stainless-Steel Slide Gates
AWWA C562-21 Fabricated Aluminum Slide Gates
AWWA C563-21 Fabricated Composite Slide Gates
AWWA C600-17 Installation of Ductile-Iron Mains and Their Appurtenances
AWWA C602-17 Cement-Mortar Lining of Water Pipelines in Place—4 In. (100 mm) and Larger
AWWA C604-17 Installation of Buried Steel Water Pipe—4 In. (100 mm) and Larger
AWWA C605-21 Underground Installation of Polyvinyl Chloride (PVC) and Molecularly Oriented Polyvinyl Chloride (PVCO) Pressure Pipe and Fittings
AWWA C606-15 Grooved and Shouldered Joints
AWWA C620-19 Spray-in-Place Polymeric Lining for Potable Water Pipelines, 4 In. (100 mm) and Larger
AWWA C621-18 Internal Pipe Joint Seal Assemblies for Water Service
AWWA C622-19 Pipe Bursting of Potable Water Mains 4 In. (100 mm) to 36 In. (900 mm)
AWWA C623-22 Cured-in-Place Pipe (CIPP) Rehabilitation of Pressurized Potable Water Pipelines, 4 In. (100 mm) and Larger
AWWA C651-14 Disinfecting Water Mains
AWWA C652-19 Disinfection of Water Storage Facilities
AWWA C653-20 Disinfection of Water Treatment Plants
AWWA C654-21 Disinfection of Wells
AWWA C655-18 Field Dechlorination
AWWA C670-20 Online Chlorine Analyzer Operation and Maintenance
AWWA C671-21 Online Turbidimeter Operation and Maintenance
AWWA C700-20 Cold-Water Meters—Displacement Type, Metal Alloy Main Case
AWWA C701-19 Cold-Water Meters—Turbine Type, for Customer Service
AWWA C702-19 Cold Water Meters—Compound Type
AWWA C703-19 Cold-Water Meters—Fire-Service Type
AWWA C704-19 Propeller-Type Meters for Waterworks Applications
AWWA C707-10(R16) Encoder-Type Remote-Registration Systems for Cold-Water Meters
AWWA C708-19 Cold-Water Meters—Multijet Type
AWWA C710-20 Cold-Water Meters—Displacement Type, Plastic Main Case
AWWA C712-19 Cold-Water Meters—Singlejet Type
AWWA C713-19 Cold-Water Meters—Fluidic-Oscillator Type
AWWA C714-19 Cold-Water Meters for Residential Fire Sprinkler Systems in One- and Two-Family Dwellings and Manufactured Homes
AWWA C715-18 Cold-Water Meters—Electromagnetic and Ultrasonic Type for Revenue Applications
AWWA C750-19 Transit-Time Flowmeters in Full Closed Conduits
AWWA C751-19 Magnetic Inductive Flowmeters
AWWA C800-21 Underground Service Line Valves and Fittings
AWWA C810-17 Replacement and Flushing of Lead Service Lines
AWWA C900-16 Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings, 4 In. Through 60 In. (100 mm Through 1,500 mm)
AWWA C901-20 Polyethylene (PE) Pressure Pipe and Tubing, 3/4 In. (19 mm) Through 3 In. (76 mm), for Water Service
AWWA C903-21 Polyethylene–Aluminum–Polyethylene (PE-AL-PE) Composite Pressure Pipe, 12 mm (1/2 In.) Through 51 mm (2 In.), for Water Service
AWWA C904-16 Cross-Linked Polyethylene (PEX) Pressure Tubing, 1/2 In. (13 mm) Through 3 In. (76 mm) for Water Service
AWWA C906-21 Polyethylene (PE) Pressure Pipe and Fittings, 4 In. Through 65 In. (100 mm Through 1,650 mm), for Waterworks
AWWA C907-17 Injection-Molded Polyvinyl Chloride (PVC) Pressure Fittings, 4 In. Through 12 In. (100 mm Through 300 mm), for Water, Wastewater, and Reclaimed Water Service
AWWA C909-16 Molecularly Oriented Polyvinyl Chloride (PVCO) Pressure Pipe, 4 In. (100 mm) and Larger
AWWA C950-20 Fiberglass Pressure Pipe
AWWA D100-21 Welded Carbon Steel Tanks for Water Storage
AWWA D102-21 Coating Steel Water-Storage Tanks
AWWA D103-19 Factory-Coated Bolted Carbon Steel Tanks for Water Storage
AWWA D104-17 Automatically Controlled, Impressed-Current Cathodic Protection for the Interior Submerged Surfaces of Steel Water Storage Tanks
AWWA D106-20 Sacrificial Anode Cathodic Protection Systems for the Interior Submerged Surfaces of Steel Water Storage Tanks
AWWA D107-16 Composite Elevated Tanks for Water Storage
AWWA D108-19 Aluminum Dome Roofs for Water Storage Facilities
AWWA D110-13(R18) Wire- and Strand-Wound, Circular, Prestressed Concrete Water Tanks
AWWA D115-20 Tendon-Prestressed Concrete Water Tanks
AWWA D120-19 Thermosetting Fiberglass-Reinforced Plastic Tanks
AWWA D121-12 Bolted Aboveground Thermosetting Fiberglass-Reinforced Plastic Panel-Type Tanks for Water Storage
AWWA D130-11(R19) Geomembrane Materials for Potable Water Applications
AWWA E102-17 Submersible Vertical Turbine Pumps
AWWA E103-21 Horizontal Centrifugal and Vertical Line Shaft Pumps
AWWA E200-18 Progressive Cavity Chemical Metering Pumps
AWWA F101-19 Contact-Molded, Fiberglass-Reinforced Plastic Wash-Water Troughs and Launders
AWWA F102-19 Matched-Die Molded, Fiberglass-Reinforced Plastic Weir Plates, Scum Baffles, and Mounting Brackets
AWWA F110-16 Ultraviolet Disinfection Systems for Drinking Water
AWWA F120-18 Ozone Systems for Water
AWWA G100-17 Water Treatment Plant Operation and Management
AWWA G200-21 Distribution Systems Operation and Management
AWWA G300-14 Source Water Protection
AWWA G400-18 Utility Management System
AWWA G410-18 Business Practices for Operation and Management
AWWA G420-17 Communication and Customer Relations
AWWA G430-14(R20) Security Practices for Operation and Management
AWWA G440-17 Emergency Preparedness Practices
AWWA G480-20 Water Conservation and Efficiency Program Operation and Management
AWWA G481-14(R20) Reclaimed Water Program Operation and Management
AWWA G485-20 Potable Reuse Program Operation and Management
AWWA G510-21 Wastewater Treatment Plant Operations and Management
AWWA G520-17 Wastewater Collection System Operation and Management
AWWA J100-21 Risk and Resilience Management of Water and Wastewater Systems
AWWA Standards Storage Binder

List Price: $6,250.00
Member Price: $4,250.00

Quantity:

Want to save more?

Log into see if you qualify for a lower rate.

Members

save $2,000.00 or more

Join

Item Details:

AWWA standards set contains all current AWWA standards (more than 180), plus a one-year subscription that brings you all revised and new standards published during the following 12 months (about 20-25 standards). You have the option to renew your subscription each year.

...

Annual subscription renewal: $850.00 for Members and $1,500.00 for Nonmembers

AWWA standards describe minimum requirements for design, installation, performance, and manufacture of products used in the drinking water industry. AWWA standards cover water pipe, treatment chemicals, storage facilities, valves, appurtenances, and utility management practices.

Regularly updated to reflect changes in materials, manufacturing, engineering design, and usage, AWWA standards are consensus documents and prescribe recommended best practices. Adoption of AWWA standards by manufacturers and water utilities is voluntary and widespread.

The AWWA standards set includes seven heavy-duty, post-type binders, and plastic-laminated index tabs to organize your standards.

View More View Less